Categories


BBB Report Shipping made sense





Join our mailing list!





  Home > Home >

GEM Dandy Energy Absorbing Equipment Feet
GEM Dandy Energy Absorbing Equipment Feet


 
Our Price: $9.90

Product Code:
GEM-FEET
Qty:

Description
 
Good Vibrations should be on your turntable, not in it! These energy-absorbing feet keep vibrations and other outside forces from disturbing your record. The latest product from legendary audio designer George Merrill, the GEM Dandy Feet are cast in an energy absorbent rubber-like material that has a durometer measurement of 60 on the Shore A scale, and each foot will support 80 lbs. A layer of softer and lower durometer material on the equipment support side helps to decouple energy transmission and help damp vibrations within the component. The GEM Dandy Feet are an excellent and affordable choice for turntables, CD players, amplifiers, preamps, and other electronic equipment! Feet may be fastened to the equipment or simply set underneath.  1.094” tall x 2.5” diameter, .38” bore diameter x .5” bore depth. Sold individually.

Average Rating: 5 of 5 Total Reviews: 5 Write a review »

  0 of 0 people found the following review helpful:
 
Huge feet November 26, 2016
Reviewer: Dennis Voss from Bloomfield Hills, MI United States  
Great, stable and seem to nicely isolate the turntable.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Wow! These are awesome feet! November 30, 2014
Reviewer: Kristie K. from Appleton, WI United States  
I bought these as replacement feet for a Yamaha PF-800 turntable. The original feet were completely dry rotted and collapsed. I can't say I hear a difference because I never listened to the table with the original collapsed feet. However, I cannot see how these WOULDN'T make a difference. They are wonderfully big and thick. They look completely natural on my turntable. There was a really strong rubber smell to them when they were first opened. It's been two weeks and the strong smell is completely gone. I did place some thin cardboard (cut up a cereal box) under the feet as a precaution as I didn't want the feet sticking or discoloring the polyurethane-based stain of the armoire that the turntable is sitting on. The feet may not stick or stain at all, but I don't feel comfortable being that guinea pig. :)

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Effective Product / Great Value ! April 6, 2014
Reviewer: John M from New York, NY United States  
The GEM Dandy feet are sturdy, make a noticeable audio difference and really do absorb vibrations as advertised. I use them underneath my two turntables, and, they are also just the right size/height for use in between my Isobar flat rear plug-in power unit / line conditioner, my Oppo Blu-Ray player and my cable box, giving me ventilation and an orderly design element in between these three components. For about $10 a foot / $40 for a set of 4, they equal or exceed the performance of other feet I have tried or demo'd that cost much more.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Works as advertised March 11, 2014
Reviewer: Bruce Posner from Bronx, New York, NY United States  
Dampened the extraneous sounds put out by the turntable coming in contact with the under surface.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
turntable feet December 2, 2012
Reviewer: daniel cependa from chilliwack, BC Canada  
i attached them to a dual 505 and used goop to glue them on   perfect

Was this review helpful to you?


Browse for more products in the same category as this item:

Home
Turntable Accessories
Turntable Accessories > Turntable Clamps / Feet